Medium shelf
Medium shelf installation steps
medium-sized plate shelf
Medium A- type shelf:
Combined structure, without any bolts, beautiful appearance, scientific structure, convenient installation and disassembly; The height of each layer can be adjusted at will with a pitch of 50mm, and each layer can carry up to 400kg under uniform distribution. The surface is treated with electrostatic spray, which is anticorrosive, rust-proof and durable. Widely used in supermarkets, enterprise warehouses and institutions; This product has reached the level of similar products in developed countries.
|
Model |
Specifications (length * width * height)(mm) |
Load of each layer (kg) |
|
A001 |
1550*600*1800/2000 |
150-250 |
|
The standard number of layers is 4, can be non-standard custom |
||
In B type shelf:
Plug-in type measuring structure, with medium ladder hole structure and cargo self-weight indentation,ShelfEasy to disassemble and assemble, the main and auxiliary frames can be connected indefinitely to increase the reliability of goods. Save investment, height to 50mm up and down adjustment, can not be customized.
B type shelfFeatures:
1. The B shelf is used in various industries, with low cost, safety and reliability, simple assembly and disassembly, and can be used alone, or can be freely arranged in the form of main and auxiliary frames.
2. The column piece of the B shelf is formed by connecting the column, cross brace and inclined brace with bolts. The column piece and the P-type closed beam are inserted to form a shelf frame, which is fixed by safety pins, and the structure is simple and reliable. The steel laminate is placed on the beam to form the whole shelf. Each layer can be 50mm step up and down free adjustment.
3. The medium B shelf can determine the layering requirements according to the size of the beam, the thickness of the laminate and the number of reinforcing ribs. Under the condition that the relative length and material selection requirements are met, the maximum layering load can reach 800kg/layer.
4. Under normal circumstances, the height of the column should not exceed 3 meters, and attic shelves can be built on the basis of the shelves.
5. The advantages of medium and B- type shelves: low cost, strong carrying capacity, wear resistance, simple replacement, low maintenance cost, allowing you to use high quality products at low cost.
The shelf adopts a structure in which column pieces are hung with cross beams, which are all plug-in combinations. The cross beams are 50mm in pitch to adjust the height of each layer, with a large carrying capacity. Usually, each layer bears 300-500kg. The laminates can be made of steel plates, wood plates and other materials.
|
Model |
Specifications (length * width * height)(mm) |
Load of each layer (kg) |
|
A001 |
2000*600*2000 |
300 |
|
The standard is 4 layers, can be non-standard customization |
||
Medium T shelf
It is also commonly called light shelf shelf. It adopts plug-in beam structure and consists of upright column, measuring support, layer plate and back pull. It is locked by the middle hole structure and the weight of the goods. It is convenient to disassemble and assemble, the main and auxiliary frames can be connected indefinitely, which increases the firmness of the shelves and saves investment. The floor height is adjusted up and down by 50MM, which can be customized without calibration. It is suitable for manual access to goods and is widely used in various industries. It has the characteristics of beautiful results, low cost, safety and reliability, simple assembly and disassembly, can be used alone, and can also be freely spliced into various arrangements.
A: Column: Cold bending and rolling T-shaped closed structure is adopted. Holes are punched on the inner side of the column with a pitch of 25mm. Therefore, the layer height of each layer can be adjusted up and down in units of 25mm when the laminate is hung on the column. The cross section of the column is composed of multiple surfaces of cold bending and rolling. Due to the technology of "automatic punching first and cold bending forming later", Jiuwei Shelf Company completely avoids the crack failure of the column due to the stress concentration of the column.
B: measuring: with high quality sheet metal stamping, simple structure, beautiful. Each side support punch has a hanging claw to connect with the column to make the connection between the columns more stable.
C: Laminate: The laminate is rolled with high-quality plates, and the bottom of the laminate is welded with reinforcing ribs, which has the characteristics of strong bearing capacity, wear resistance, simple replacement and low maintenance cost.
D: back pull: warehouse shelves using basket structure, simple structure, beautiful. The storage shelf structure is more stable through the adjustment of the back basket bolts.
medium trapezoidal shelfTechnical indicators of components:
A: Column:
1. The cumulative error of the total length adjustment hole distance of the column is not more than 2mm, and the adjacent hole distance error is less than 0.02mm;
2, the shelf full length size limit deviation is not more than 2mm;
3. The bending error of the column piece is less than L/1000mm;
4. The vertical deviation between the column and the installation ground is less than L/1000mm;
B: Laminates:
1. The length dimension error of the laminate is less than 0.5mm;
2,ShelfWhen the laminate reaches the required maximum load, the deflection of the beam shall not be greater than L/200, and the safety factor shall not be less than 1.5.
Application Scenarios
Get in touch with our team in time and be happy to help you